Refine Results
- 必威体育赛事投注
- Applications and Industries
- Content Type
- Analysis Technique
- Analyzed With
- Chemical Group
- Compounds
- Detection Technique
- Injection Technique
- Instrument
- Analysis Platform
- Language
- Publication Date
61 - 80 of 211 results
Applied Filters
The analysis of used engine oils by spectrometric techniques for the early detection of machine component failure...
The determination of Hg by cold-vapor atomic absorption was first proposed by Poluektov et.al.[1] in 1963.In this method...
Examines using the GTA-95 to determine levels of vanadium in industrial fuel oil.Using air as an ashing aid to reduce matrix interferences was investigated.
Mercury in various forms constitutes a serious environmental pollutant!1,2 hence there is the need for its detection and determination, particularly at trace levels...
Hydride generation techniques are used routinely for the determination of As, Se, and Sb in environmental samples...
Application note explaining a technique for determining the concentration of base metals in mining ores.
| Publication Part Number | 5990-9014EN | ||
|---|---|---|---|
| Analysis | Analysed with Part No. |
|
|
| Instrument |
|
||
| Analytical Technique | Technique |
|
|
| Injection |
|
||
| Detection |
|
||
| Sample | Chemical Group |
|
|
| 示例矩陣 |
|
| Chinese (Simplified) (China) | Complete (PDF) |
|---|
Presents results using the CRA-90 to determine Ag, As, Be, Cd, Cr, Pb, Sb, Se, Tl, Cu, Zn, Ni levels of pollutants in various environmental samples.
490-GC can be used for analyses of mine gas, especially carbon monoxide at low level which is essential for the safety of mine workers.
| Publication Part Number | SI-02235 | |||
|---|---|---|---|---|
| Analysis | Analysed with Part No. |
|
||
| Instrument |
|
|||
| Analytical Technique | Technique |
|
||
| Injection |
|
|||
| Detection |
|
|||
| Sample | Chemical Group |
|
||
| 示例矩陣 |
|
The 8800 Triple Quadrupole ICP-MS operating with a single acquisition method to successfully to measure all REE impurities in high-purity REE materials.
必威体育登录手机This application note describes a method for fast on-site analysis of mine gases in less than 100 seconds using the Agilent 490 Micro GC.
| Publication Part Number | 5991-0438EN | |||
|---|---|---|---|---|
| Analysis | Analysed with Part No. |
|
||
| Instrument |
|
|||
| Analytical Technique | Technique |
|
||
| Injection |
|
|||
| Detection |
|
|||
| Sample | Chemical Group |
|
||
| 示例矩陣 |
|
| Chinese (Simplified) (China) | Complete (PDF) |
|---|
| Publication Part Number | 5990-8975EN | ||
|---|---|---|---|
| Analysis | Analysed with Part No. |
|
|
| Instrument |
|
||
| Analytical Technique | Technique |
|
|
| Injection |
|
||
| Detection |
|
||
| Sample | Chemical Group |
|
|
| 示例矩陣 |
|
必威体育登录手机Gas chromatography with a four-channel Agilent 490 Micro GC separates constituents of mine gas, including carbon monoxide, in 120 seconds.
| Publication Part Number | A01789 | ||
|---|---|---|---|
| Analysis | Analysed with Part No. |
|
|
| Instrument |
|
||
| Analytical Technique | Technique |
|
|
| Injection |
|
||
| Detection |
|
||
| Sample | Chemical Group |
|
|
| 示例矩陣 |
|
Installation instructions to access the 10,000 spectra organized into nine separate libraries for ease of searching.必威体育登录手机These libraries are formatted for use with Agilent's Resolution Pro software as well as BioRad's KnowItAll and Thermo Electron's...
必威体育登录手机Instructions to install Agilent FTIR Sample Data, Methods and Libraries.必威体育登录手机Installed sample libraries include a selection of 200 spectra from Agilent's full FTIR spectral libraries (part number 099-2224).The CD is formatted for use with Resolutions...
Application note for the determination of low levels of arsenic using flame AAS and UltrAA lamps
必威体育登录手机Application note for unmatched spectral interference removal in ICP-MS Using the Agilent Octopole Reaction System with Helium Collision Mode
A large percentage of rubies and sapphires undergo some degree of heat treatment to enhance their color and, as a result, to increase their value.